power switch UGR<6 SDCM<5 RF-smart zigbee DALI RF Bluetooth WiFi Ra>90 CCT RGB+CCT dtw hcl RGBWW RGBNW RGBCW RGB L1 L2 L3 Phase 962 CATALOG | legend POWER SWITCH Luminaires with an integrated power switch can be switched in wattage and operated in several power levels. The power reduction enables flexible adjustment of the light intensity and is usually carried out via a dip switch on the unit. UGR The UGR value indicates how glare-free a luminaire is, thus avoiding disturbing reflections. The lower the UGR value, the more glare-free a luminaire emits its light. Luminaires with a UGR value < 19 are suitable for office environments and workplaces. CONTROLLABLE VIA ... The luminaire can be controlled via one of the following lighting control systems: RF smart [the new control system from DEKO-LIGHT for up to eight light zones], zigbee, DALI, RF [Radio Frequency], Bluetooth, WiFi. LIGHT COLOURS / CHANNELS Depending on the LED equipment, different colours can be mixed with the luminaire via the individual RGB / RGBW channels. COLOUR CONSISTENCY SDCM The SDCM value describes the standard deviation of an LED from the target colour location and is a measure of production-related colour differences between LEDs with identical values. The higher the value, the greater the colour deviation. The maximum valid deviation is 6 SDCM. COLOUR RENDERING INDEX RA The colour rendering index Ra describes the measure of the correspondence of the perceived light colour between an existing lighting situation and a reference light source. The higher the Ra value, the better/natural the colour rendering. SELECTABLE LIGHT COLOUR Luminaires with this function allow the light colour to be adjusted and therefore offer a wide range of applications. DIM TO WARM The dim-to-warm function automatically adjusts the light colour when a luminaire is dimmed. The rule is: the lower the luminous intensity, the warmer the light colour. CORRIDOR FUNCTION With the DALI corridor function [Corridor Dim], the lighting is lowered to a predefined dimming level when no one is present and automatically raised when motion is detected. HCL HCL stands for "Human Centric Lighting" and means the tuning of artificial light indoors to natural daylight and the human biorhythm. PHASE SWITCH The required phase conductor phase [L1, L2 or L3] can be selected manually using the integrated phase switch. This enables flexible installation and even load distribution in the network - particularly useful for multi-phase lighting systems or in commercial applications with multiple circuits. TOOL-FREE INSTALLATION These luminaires are delivered with pre-assembled components and can be mounted without additional tools. This saves time during installation and enables particularly simple and efficient conversion in the event of renovation or refurbishment.
RkJQdWJsaXNoZXIy NTAzMzk=